There is no limit to the overall handling capacity of C-Bus control systems. The C-Bus relay units are C-Bus relay-switching devices designed to be DIN-rail mounted into electrical switchboards or similar enclosures. For maximum control flexibility and energy savings, individual zones are independently controlled. The most commonly specified relay controls are 10A and 20A per channel, but a C-Bus system can easily accommodate all current loads.

C-Bus DIN Rail-Mounted 10A Relays

Part Codes: L5504RVF, L5504RVFP, L5508RVF, L5508RVFP, L5512RVF, L5512RVFP

Features 4, 8 or 12 channels of voltage free relay switching.

  • Rated at 250V AC, 10A incandescent or 10A fluorescent load per channel.
  • Available with and without on-board 200mA C-Bus Power Supply.
  • Incorporates a software selectable Network Burden and C-Bus System Clock.

C-Bus DIN Rail-Mounted 20A Relays

Part Codes: L5504RVF20, L5504RVF20P

Features 4 channels of voltage free relay switching.

  • Rated at 20A incandescent, 20A HID or 20A fluorescent load per channel.
  • Available with on-board 200mA C-Bus Power Supply providing a software selectable Network Burden and C-Bus System Clock.
  • Each relay channel features magnetic latching and a built-in mechanical level for manual changeover of relay state.

C-Bus DIN Rail-Mounted Changeover Relays

Part Codes: L5504RVFC, L5504RVFCP

DIN Rail mounted, 4 channel C-Bus Changeover Relays. Common, Normally Open and Normally Closed terminals are provided for each relay channel.

  • Can be wired to achieve electrical interlocking, where outputs are mutually exclusive
  • 4-channel changeover relay with interlock features, DIN rail-mounted
  • 8M DIN modules wide
  • Dimensions 144mm x 85mm x 65mm
  • Used for control of air conditioning systems (ON/OFF, low, medium and high) and shutter or blind control (UP/DOWN)
  • Rated at 10A resistive, 5A incandescent/inductive, 1A fluorescent per channel
  • Incorporates a software selectable network burden and C-Bus system clock
  • A maximum of 10 units may be connected to any C-Bus network
  • Incorporates an inbuilt 200mA C-Bus power supply
  • C-Bus Learn Enabled

C-Bus DIN Rail-Mounted Fan Control Relay

Part Code: L5501RFCP

Designed and built with the installer in mind, the C-Bus ceiling sweep fan control relay provides an easy-to-install module with features required to make direct fan motor control safe and easy.

  • Single channel relay for the direct control of ceiling sweep fans
  • Capacitor control (utilise capacitor supplied with fan)
  • Inbuilt capacitor bay
  • High temperature rated (to 70°C)
  • DIN rail-mounted, 3M wide
  • Dimensions 53 x 93mm x 65mm
  • Up to 3-speed control of fan
  • Programmable labels for fan speed broadcasted onto C-Bus
  • Powered from C-Bus, draws 18mA
  • Optional remote mounting enclosure available, catalogue number 5501FRE

C-Bus DIN Rail-Mounted Shutter Relay

Part Code: L5501RBCP

Designed to directly drive the motors for soft furnishing components like motorised blinds, curtains, shutters, and awnings. The relay unit can be easily installed in the switchboard or in the field in the optional din-rail mount enclosure.

  • Single channel relay for the direct control of motorised blinds, curtains or shutters via C-Bus
  • DIN rail-mounted, 2M wide
  • Dimensions 36 x 93mm x 63mm
  • Allows UP/DOWN and stop control
  • A maximum of 80 units may be connected to a C-Bus network
  • Powered from C-Bus, draws 18mA
  • C-Bus Learn Enabled
  • Optional remote mounting enclosure available (5501RE)

C-Bus 8-Channel Extra Low Voltage Relay

Part Code: L5108RELVP

Provides 8 relay channels for switching ELV devices such as irrigation solenoids, ELV air-conditioning dampers and gate and door strikes.
Can interface with 3rd party systems via low-level dry contact control. The relay is housed in a dust-proof enclosure (IP5x rating) and suitable for installation into sheds (50°C temperature rating).

  • 8 x single-pole, double-throw (changeover) relays
  • Powered from C-Bus, draws 32mA
  • Contacts rated 2A (AC3) @ 30V a.c./d.c.
  • Relays can be operated in pairs
  • Local override buttons
  • High temperature rated (to 50°C)
  • IP5x rated enclosure (dustproof)
  • Removable terminals

C-Bus Inline 2-Channel Relay

Part Code: 5102RVF

Suitable for incandescent, inductive and fluorescent voltage free relay switching up to the rated maximum load of 10A per channel.

  • Features 2 channels of 250V a.c. switching (voltage free)
  • Dimensions 198mm x 42mm x 39mm
  • Suitable for incandescent, inductive and fluorescent switching up to a maximum load of 10A per channel
  • A maximum of 100 units may be connected to any C-Bus network
  • Does not draw any current from C-Bus network when mains power is connected
  • Does not include Learn Enabled features

C-Bus Inline Single-Channel Relays

Part Code: 5101R

Suitable for incandescent, inductive and fluorescent voltage free relay switching up to the rated maximum load of 10A per channel.

  • Features 1-channel of 250V a.c. switching
  • Dimensions 198mm x 42mm x 39mm
  • Suitable for incandescent, inductive and fluorescent switching up to a maximum load of 10A
  • A maximum of 100 units may be connected to any C-Bus network
  • Does not draw any current from C-Bus network when mains power is connected
  • Available with or without cord set
  • Does not include Learn Enabled features
Find out more. Click here to download the latest Clipsal C-Bus Product Guide.
Download Product Guide