![]() |
![]() |
||||
![]() |
|||||
| Wireless Neo Leading Edge Dimmers | ![]() |
|||||
![]() |
||||||||||||||||||
| E5854D1L2AAWE 4 Gang 2 Channel Leading Edge Dimmer | £179.00 | £210.33 | ||||||||||||||||
| E5858D1L2AAWE 8 Gang 2 Channel Leading Edge Dimmer | £189.00 | £222.08 | ||||||||||||||||
Please click here for a larger image |
![]() |
![]() |
||||||||||||||||
![]() |
||||||||||||
|
Supply Voltage 216 - 264VAC Supply Frequency 50Hz Minimum Load/Channel 25W lamp or 0.25A fan motor Maximum Load (Total) 500W, 2A (single channel unit) 250W, 1A (two channel unit) Load Rating (Total) 2A Off State Leakage Current 12mA - Channel 1, 5mA - Channel 2 Centre Frequency 433.92MHz Transmitting Power 1mW Maximum Range 50m (free air) Devices Per Network 30 (maximum) Timer Range 1 sec to 18 hrs Timer Resolution 1 sec Mounting Centres 60.3mm Dimensions 87mm(W) x 87mm(H) x 41mm(D) Status Indicators Orange Warm Up Time 5 seconds Standard Colours White Operating Temperature Range 0˚C to 40˚C Operating Humidity Range 10 - 95% RH |
|||||||||||
| NEW! Black and White Touch Screen |
||||||||||||
![]() |
||||||||||||
![]() |
||||||||||
![]() |
||||||||||
| The Neo wireless leading edge dimmers are designed for new and retrofi t construction programs and use wireless (RF) technology to communicate with other C-Bus devices. The wireless switches are powered from the mains supply and being of a two-wire design, they require no neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the unit’s operating status. The wireless protocol is based on the same protocol as wired C-Bus, for robustness and reliability and features 128-bit encrypted data for a highly secure network. The wireless switches feature push buttons, which are used to control the load directly connected to that device as well as free locate push buttons, which may be programmed to control loads connected to other C-Bus input devices within the same network. The leading edge dimmers are compatible with incandescent, iron core transformers, inductive input electronic transformers and fan motor loads. The wireless switches support dimmer, toggle, on, off , timer and scene functions and may be programmed using learn mode or the toolkit software. Each unit features a unique identifi cation code, so there is no chance of interference between devices located in separate networks. The Neo switches are designed to use standard mounting accessories, such as brackets and wall boxes, for ease of installation. |
||||||||||
![]() |
||||||||||
KEY INPUT UNITS | INPUT UNITS | SYSTEM UNITS | OUTPUT UNITS | WIRELESS | AUDIO | SOFTWARE | DESIGN GUIDEhome | about us | online shop | contact us |
||||
©2008 C-Bus Direct, a division of LDSCo. Reg 5514263Unit 8, Vision House, Kingfisher Business Park Blashford Ringwood Hants BH24 3NX01425 478395designed by eberlin |
||||