	Network Analyser

5100NA Network analyser

£131.82

£154.89


									Catalogue Numbers 5100NA C-Bus Supply Voltage 15-36VDC @ 20mA Status Indicators: Power available Clock not present Excess voltage Remove burden Add burden Excess cable C-Bus Termination 2 x Alligator clips Operating Temperature Range 0˚C to 45˚C Operating Humidity Range 0 - 95% RH, non-condensing
		Please click here for a larger image



		NEW! Black and White Touch Screen


									The network analyser is a fi eld diagnostic tool designed to measure and report the status of various network parameters. The network analyser connects to the C-Bus network and is used to measure the network voltage, active clock and network impedance and determine if these are within acceptable limits for correct operation. The unit displays the results by illuminating LEDs located on the unit. Note: The network analyser should be used in conjunction with the C-Bus Calculator software application.

			KEY INPUT UNITS \| INPUT UNITS \| SYSTEM UNITS \| OUTPUT UNITS \| WIRELESS \| AUDIO \| SOFTWARE \| DESIGN GUIDE home \| about us \| online shop \| contact us
	©2008 C-Bus Direct, a division of LDS Co. Reg 5514263 Unit 8, Vision House, Kingfisher Business Park Blashford Ringwood Hants BH24 3NX 01425 478395 designed by eberlin

SystemUnits1

C-Bus Direct: The official national distributor and online shop for Clipsal C-Bus products. Serving the Poole and Bournemouth areas for several years.