	Network Bridge

5500NB Network bridge DIN rail

£247.79

£291.15

						Provides an isolated communications path between networks Programmable via the C-Bus confi guration software Programmed variables are stored in non-volatile memory and are retained in case of loss of C-Bus power Designed to fit standard 35mm top hat DIN rail, measures just 4M in size Designed to fit into standard electrical switchboards C-Tick (Australia/New Zealand), CE (European Community) compliant			Catalogue Number 5500NB C-Bus Supply Voltage 15-36VDC @ 20mA Electrical Isolation rating 3,500V RMS (opto-isolated, 1 minute) (between networks) Maximum Number of Units on 100 a Single C-Bus Network Status Indicators Network 1 and Network 2 C-Bus Termination 4 x RJ45 sockets (Network 1 and 2) Operating Temperature Range 0˚C to 45˚C Operating Humidity Range 0 - 95% RH, non-condensing
		Please click here for a larger image



		NEW! Black and White Touch Screen


									The network bridge is a network support device that provides an isolated communications channel between C-Bus units on separate networks. Both sides of the network bridge are optically isolated, providing electrical isolation between adjacent networks. Network bridges are required to manage networks to particular units in particular zones, or to extend the network past system limitations of 100 passive units and 1000 metres of C-Bus cable in any one network.

			KEY INPUT UNITS \| INPUT UNITS \| SYSTEM UNITS \| OUTPUT UNITS \| WIRELESS \| AUDIO \| SOFTWARE \| DESIGN GUIDE home \| about us \| online shop \| contact us
	©2008 C-Bus Direct, a division of LDS Co. Reg 5514263 Unit 8, Vision House, Kingfisher Business Park Blashford Ringwood Hants BH24 3NX 01425 478395 designed by eberlin

SystemUnits1

C-Bus Direct: The official national distributor and online shop for Clipsal C-Bus products. Serving the Poole and Bournemouth areas for several years.