	4 Channel Relay Driver Range Learn Enabled

L5504RDP 4 Channel Relay Driver, C-Bus 200mA

£191.41

£224.91


						• Units available both with and without a 200mA C-Bus power supply on-board Configured via either the C-Bus Installation Software or via the Learn Enabled Features Local on/off toggle buttons allow individual channels to be manually overridden at each unit Remote on and off facilities permit all channels to be turned on or off without C-Bus network communication Incorporates C-Bus Network Status, Mains Power Status, and Load Status indicators Capable of generating a C-Bus clock signal if enabled EMC Compliant to meet the requirements for marking with the CE and RCM marks Designed to fit standard 35mm top hat DIN rail, measures just 8M in size			Catalogue Number L5504RDP Line Voltage 220-240VAC C-Bus Source Current 0mA Maximum Number of Units on 100
		Please click here for a larger image



		NEW! Black and White Touch Screen


									The DIN Driver is a 8M DIN rail mounted product designed to operate in conjunction with the relay units, 5000RL20 and 5002RL20. The relay driver is a C-Bus device, learn enabled which supplies control signal (pulse output) to drive the external relay. The advantages of the relay driver are, the external relay may be remotely mounted, and if a relay unit fails it may be replaced without the need to replace the relay drivers. The relay driver features local overrides so the state of the external relay may be toggled from the unit.

			KEY INPUT UNITS \| INPUT UNITS \| SYSTEM UNITS \| OUTPUT UNITS \| WIRELESS \| AUDIO \| SOFTWARE \| DESIGN GUIDE home \| about us \| online shop \| contact us
	©2008 C-Bus Direct, a division of LDS Co. Reg 5514263 Unit 8, Vision House, Kingfisher Business Park Blashford Ringwood Hants BH24 3NX 01425 478395 designed by eberlin

OutputUnits1

C-Bus Direct: The official national distributor and online shop for Clipsal C-Bus products. Serving the Poole and Bournemouth areas for several years.