![]() |
![]() |
||||
![]() |
|||||
| 4 Channel Relay Driver Range | ![]() |
|||||
![]() |
![]() |
![]() |
![]() |
|||||||||||||||||||
![]() |
||||||||||||||||||||||
| 5504RDP 4 Channel Relay Driver | £191.41 | £224.91 | ||||||||||||||||||||
![]() |
![]() |
|||||||||||||||||||||
![]() |
||||||||||
|
Catalogue Number 5504RDP Line Supply Voltage 220-240VAC Supply Frequency 47-53Hz and 57-63Hz C-Bus Supply Voltage 15-36VDC @ 0mA Driver Circuit Use only with 5000RL20 or 5002RL20 C-Bus Source Current 0mA Maximum Number of Units on 100 a Single C-Bus Network Status Indicators Unit and C-Bus Warm Up Time 5 seconds Network Clock Software selectable Network Burden Software selectable C-Bus Termination 2 x RJ45 Socket Load Termination 2 x 1.5mm2 or 1 x 2.5mm2 Operating Temperature Range 0˚C to 45˚C Operating Humidity Range 0 - 95% RH, non-condensing |
|||||||||
Please click here for a larger image |
||||||||||
![]() |
||||||||||
| NEW! Black and White Touch Screen |
||||||||||
![]() |
||||||||||
![]() |
||||||||||
| The C-Bus 4 channel relay units are DIN rail mounted units designed to control up to four channels of external latching relay loads. The relay driver is used in conjunction with the relay modules type 5000RL20 (single channel 20A) and 5002RL20 (dual channel 20A). These relay driver units feature a remote override for on/off control, C-Bus and unit status indicators. These units are low cost and do not feature learn mode or local override control. The relay units are available as passive models only, and do not source current to the C-Bus network. |
||||||||||
![]() |
||||||||||
![]() |
||
KEY INPUT UNITS | INPUT UNITS | SYSTEM UNITS | OUTPUT UNITS | WIRELESS | AUDIO | SOFTWARE | DESIGN GUIDEhome | about us | online shop | contact us |
||||
©2008 C-Bus Direct, a division of LDSCo. Reg 5514263Unit 8, Vision House, Kingfisher Business Park Blashford Ringwood Hants BH24 3NX01425 478395designed by eberlin |
||||