	4 Channel Analogue Output Range

L5504AMP 4 Channel Analogue Output

£163.27

£191.84


						Provides 4 channels of 0 - 10V dimming control Programmable via the learn mode feature or using the C-Bus Toolkit Software Programmed variables are stored in non-volatile memory and are retained in case of loss of mains or C-Bus power Local and remote on/off control independent of C-Bus communications Programmable power up state following power cycling Logic states (max/min) programmable using the C-Bus Toolkit Software Designed to fi t standard 35mm top hat DIN rail, measures just 8M in size Designed to fi t into standard electrical switchboards RCM (Australia/New Zealand), CE (European Community) compliant			Catalogue Number L5504AMP Line Supply Voltage 220-240VAC Supply Frequency 47-53Hz and 57-63Hz C-Bus Supply Voltage 15-36VDC @ 0mA Output Control Range 0-10VDC Control Range 3 - 100% Source Current 2.5mA Sink Current 15mA at Vout = 0V, 8.0mA at Vout = 10V i.e. I = 15 - (0.7 Vout) mA Maximum Number of Units on 100 Single C-Bus Network Status Indicators Channel Status (4), Unit and C-Bus Warm Up Time 5 seconds Network Clock Software selectable Network Burden Software selectable C-Bus Termination 2 x RJ45 Socket Load Termination 2 x 1.5mm2 or 1 x 2.5mm2 Operating Temperature Range 0˚C to 45˚C Operating Humidity Range 0 - 95% RH, non-condensing
		Please click here for a larger image



		NEW! Black and White Touch Screen


									The C-Bus 4 channel analogue output units are DIN rail mounted units designed to control 0 - 10V and 1 - 10V compatible dimmable electronic ballasts used in the lighting industry. These analogue output units feature learn mode, local and remote overrides for on/off control, Channel, C-Bus and unit status indicators. Each channel is capable of sourcing or sinking current and the number of ballasts that may be connected to the analogue output unit is a function of the current drain of that particular ballast. The analogue control signal typically regulates lighting output over the range of 3 - 100%. The dimming transitions are smooth and flicker free. The analogue output units are available as passive models only, hence do not source current to the C-Bus network.

			KEY INPUT UNITS \| INPUT UNITS \| SYSTEM UNITS \| OUTPUT UNITS \| WIRELESS \| AUDIO \| SOFTWARE \| DESIGN GUIDE home \| about us \| online shop \| contact us
	©2008 C-Bus Direct, a division of LDS Co. Reg 5514263 Unit 8, Vision House, Kingfisher Business Park Blashford Ringwood Hants BH24 3NX 01425 478395 designed by eberlin

OutputUnits1

C-Bus Direct: The official national distributor and online shop for Clipsal C-Bus products. Serving the Poole and Bournemouth areas for several years.