	Indoor Motion Sensor, 90 Degrees

5751LWE PIR indoor occupancy sensor-learn

£73.20

£86.01

						Programmable by learn mode or using the C-Bus Toolkit Software Programmed variables are stored in non-volatile memory and are retained in case of loss of mains or C-Bus power Programmable walk test LED for commissioning User adjustable light level threshold, from low light (1 Lux) to full sunlight Dual element detectors to minimise false triggering. Optical bandpass fi lter minimises unwanted heat sources from triggering the circuitry C-Tick (Australia/New Zealand), CE (European Community) compliant			Catalogue Number 5751LWE E5751L Base, Mounting Centres 84mm 60.3mm C-Bus Supply Voltage 15-36VDC @ 18mA Timer Range Programmable, 1 sec - 18 hrs Timer Resolution 1 sec Light Threshold Adjustment User adjustable, 1 Lux to full sunlight Mounting Height 2.4m nominal, (2.0 to 3.2m) Field of View 90 degrees Detection Area 6m x 6m Maximum Number of Units on 100 a Single C-Bus Network Status Indicator Walk test LED Warm Up Time 5 seconds IP Rating IP44 C-Bus Termination Fly lead x 2 Operating Temperature Range 0˚C to 45˚C Operating Humidity Range 0 - 95% RH, non-condensing
		Please click here for a larger image



		NEW! Black and White Touch Screen


									The C-Bus indoor occupancy sensors are surface mounted, input units used to detect movement by sensing natural thermal radiation emitted from any moving body. When movement is detected, the unit issues commands over the C-Bus network to control C-Bus output devices. In addition, the unit features a light level sensor to automatically switch lighting on, under low light conditions. The sensor has a detection fi eld that covers an area up to 8.5 metres from the unit, with a fi eld of view of 90 degrees. The unit features a ‘ lens less’ design with 12 overlapping zones forming a continuous detection fi eld, therefore resulting in uniform sensitivity across the whole of the detection fi eld, with no dead zones. This features allows the sensor to be ceiling or wall mounted. The sensor features learn mode, which permits the unit to be programmed without the need for a PC connected to the system. The sensor features an environmental rating of IP44 and is suitable for indoor applications. The sensor is designed for surface mount applications, and located in the corner of the room where detection is required.

	©2008 C-Bus Direct, a division of LDS Co. Reg 5514263 Unit 8, Vision House, Kingfisher Business Park Blashford Ringwood Hants BH24 3NX 01425 478395 designed by eberlin
			KEY INPUT UNITS \| INPUT UNITS \| SYSTEM UNITS \| OUTPUT UNITS \| WIRELESS \| AUDIO \| SOFTWARE \| DESIGN GUIDE home \| about us \| online shop \| contact us

inputunits1

C-Bus Direct: The official national distributor and online shop for Clipsal C-Bus products. Serving the Poole and Bournemouth areas for several years.