	Bus Coupler

5104BCLWE Bus coupler auxiliary input

£73.20

£86.01


						Provides 4 channels of input, compatible with voltage free mechanical switches Programmable by learn mode or using the C-Bus confi guration software Programmed variables are stored in non-volatile memory and are retained in case of loss of mains or C-Bus power Small in size and volume, designed to fi t into any wallbox C-Tick (Australia/New Zealand), CE (European Community) compliant			Catalogue Number 5104BCL WE C-Bus Supply Voltage 15-36VDC @ 18mA Maximum Distance between 1m Switch and Bus Coupler Number of Channels 4 LED Drive Output 0mA Maximum Number of Units on 100 a Single C-Bus Network Status Indicators Channel (4) Warm Up Time 5 seconds C-Bus Termination Screw terminals Load Termination Push Terminals, 1 x 1.5mm2 Operating Temperature 0˚C to 45˚C Operating Humidity 0 - 95% RH, non condensing
		Please click here for a larger image



		NEW! Black and White Touch Screen


									The C-Bus bus couplers provide non-isolated inputs for voltage free, mechanical switches to interface to the C-Bus network. The bus couplers support momentary and latching switch types. The bus coupler units may be programmed with the same functions as a key input, including toggle, timer, dimmer and scene control. The four channel bus coupler provides support for 4 switches which are programmed to report the state of the switch. The bus couplers are small in size and volume and are designed to fi t into any wallbox.

	©2008 C-Bus Direct, a division of LDS Co. Reg 5514263 Unit 8, Vision House, Kingfisher Business Park Blashford Ringwood Hants BH24 3NX 01425 478395 designed by eberlin
			KEY INPUT UNITS \| INPUT UNITS \| SYSTEM UNITS \| OUTPUT UNITS \| WIRELESS \| AUDIO \| SOFTWARE \| DESIGN GUIDE home \| about us \| online shop \| contact us

inputunits1

C-Bus Direct: The official national distributor and online shop for Clipsal C-Bus products. Serving the Poole and Bournemouth areas for several years.