	General Input Unit

E5504GI 4 channel general input module

£258.97

£304.29


						Provides 4 channels of input, compatible with a range of third party sensor products Capable of threshold switching or broadcasting value onto the network Programmable via the C-Bus Toolkit Software Programmed variables are stored in non-volatile memory and are retained in case of loss of mains or C-Bus power Designed to fi t standard 35mm top hat DIN rail Designed to fi t into standard electrical switchboards C-Tick (Australia/New Zealand), CE (European Community) compliant			Catalogue Number E5504GI Supply Voltage 24VAC +/- 10% @ 500mA, power pack not supplied with the unit Supply Frequency 50/60Hz C-Bus Supply Voltage 15-36VDC @ 18mA Auxiliary Output 24VDC @ 250mA Voltage Inputs 0 - 1V, 0 - 5V, 0 - 10V and 0 - 20V Current Inputs 0 - 20mA and 4 - 20mA Impedance Inputs 0 - 500Ω, 0-1kΩ and 0-3kΩ Digital Inputs Yes Broadcast Rate 2 to 1,024 seconds Maximum Number of Units on 10 a Single C-Bus Network Status Indicators Unit and C-Bus A/D Conversion 8 - bit Accuracy 0.5% Warm Up Time 5 seconds Network Clock Software selectable Network Burden Software selectable C-Bus Termination 2 x RJ45 Socket Load Termination 2 x 1.5mm2 or 1 x 2.5mm2 Operating Temperature Range 0˚C to 45˚C Operating Humidity Range 0 - 95% RH, non-condensing
		Please click here for a larger image



		NEW! Black and White Touch Screen


									The C-Bus 4 channel general input units are DIN rail mounted units designed to measure digital, voltage, current loop and thermistor inputs and generate messages to the C-Bus network. The unit is designed to broadcast the actual measured value to the C-Bus network, which in turn may be displayed on other C-Bus devices such as the touch screen, C-Gate or C-Lution. In addition, the unit may trigger a group address as a function of the input level, up to eight trigger points may be assigned to a single input channel. The general input unit is designed to interface to third party products, such as light level sensors, temperature sensors, power, frequency, moisture, rate sensors and others. In this way, the general input may be used to extend the functionality of the C-Bus and its ability to integrate with other systems such as HVAC and power monitoring systems. The general input also generates 24VDC to power the external sensors. The general input units are available as passive models only, hence do not source current to the C-Bus network.

	©2008 C-Bus Direct, a division of LDS Co. Reg 5514263 Unit 8, Vision House, Kingfisher Business Park Blashford Ringwood Hants BH24 3NX 01425 478395 designed by eberlin
			KEY INPUT UNITS \| INPUT UNITS \| SYSTEM UNITS \| OUTPUT UNITS \| WIRELESS \| AUDIO \| SOFTWARE \| DESIGN GUIDE home \| about us \| online shop \| contact us

inputunits1

C-Bus Direct: The official national distributor and online shop for Clipsal C-Bus products. Serving the Poole and Bournemouth areas for several years.