 |
 |
||||
 |
|||||
 |
|
|
|
|
|
| Infrared Output Units |  |
|||||
|
|
|
|
|
|
|
 |
 |
 |
 |
|||||||||||||||||
 |
||||||||||||||||||||
 |
 |
|
 |
|||||||||||||||||
 |
E5034NIRT 2 Channel Infrared Controller |  |
|
£236.93 | |
|
£278.39 | |
||||||||||||
 |
 |
|
||||||||||||||||||
|
|
|
|
|||||||||||||||||
|
8050LD Single Infrared Emitter Lead | |
|
£23.22 | |
|
£27.28 | |
||||||||||||
|
|
|
||||||||||||||||||
|
|
|
|
|||||||||||||||||
|
80502LD Dual Infrared Emitter Lead | |
|
£31.92 | |
|
£37.51 | |
||||||||||||
|
|
|
||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||
|
5100RP Infrared Code Reader | |
|
£436.03 | |
|
£512.34 | |
||||||||||
|
|
|
||||||||||||||||
|
|
|
|
|||||||||||||||
|
5100HSC High Speed Programming Guide | |
|
£22.02 | |
|
£25.87 | |
||||||||||
|
|
|
||||||||||||||||
Please click here for a larger image |
||||||||||||||||||
 |
 |
|||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
||||||||||||
|
C-Bus Supply Voltage 15-36VDC @ 18mA IR Code Capacity 200 IR codes stored on unit IR Carrier Frequency 30-455kHz IR Pulse Width > 5 micro seconds Maximum Number of Units 50 on a Single C-Bus Network Status Indicator Programmable, (Unit and IR Transmit) Warm Up Time 5 seconds C-Bus Termination Screw terminals Programming Port 4-way SIL header Emitter Outputs 2 x 3.5mm audio sockets Network Clock Software selectable Network Burden Software selectable Standard Colours White Operating Temperature Range 0˚C to 45˚C Operating Humidity Range 0 - 95% RH, non-condensing |
|||||||||||
| NEW! Black and White Touch Screen |
||||||||||||
 |
||||||||||||
 |
 |
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
 |
|||||||||
 |
||||||||||
 |
||||||||||
| The infrared output unit is a C-Bus device, which is used to control audio visual and air-conditioning units. The infrared output module is powered from the C-Bus network and no additional power supplies are required. The infrared module can store up to 200 native IR codes on the unit stored on non-volatile memory. Additional IR codes may be downloaded to the unit, at any time, before or following installation. The IR codes are triggered by a C-Bus group address, which may be initiated from a C-Bus key input, touch screen or any of the C-Bus application software suites. The infrared output unit features two infrared emitter outputs that are individually addressable. Multiple infrared units may be located on the same C-Bus network, providing localized control of IR devices. The infrared unit is supplied with an extensive IR code library with popular AV and HVAC manufacturer’s codes. An optional IR code reader type 5100RD is available, which may be used to learn IR codes and then downloaded to the unit using the high speed programming cable accessory. |
||||||||||
 |
||||||||||
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
KEY INPUT UNITS | INPUT UNITS | SYSTEM UNITS | OUTPUT UNITS | WIRELESS | AUDIO | SOFTWARE | DESIGN GUIDEhome | about us | online shop | contact us |
||||
©2008 C-Bus Direct, a division of LDSCo. Reg 5514263Unit 8, Vision House, Kingfisher Business Park Blashford Ringwood Hants BH24 3NX01425 478395designed by eberlin |
||||
|
|
|
|
|
