 |
 |
||||
 |
|||||
 |
|
|
|
|
|
| Audio Matrix Switcher |  |
|||||
|
|
|
|
|
|
|
 |
 |
 |
 |
|||||||||||||||||
 |
||||||||||||||||||||
 |
 |
|
 |
|||||||||||||||||
 |
560884 Audio Matrix Switcher, C-Bus Enabled |  |
|
£879.38 | |
|
£10.54.42 | |
||||||||||||
 |
 |
|
||||||||||||||||||
|
|
|
|
|||||||||||||||||
|
8050LD Single infrared Emitter Lead | |
|
£23.22 | |
|
£27.28 | |
||||||||||||
|
|
|
||||||||||||||||||
|
|
|
|
|||||||||||||||||
|
80502LD Dual infrared Emitter Lead | |
|
£31.92 | |
|
£37.51 | |
||||||||||||
|
|
|
||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
||||||||||||
 |
 |
|||||||||||
|
TECHNICAL INFORMATION External Power Supply - 220/240Vac, 50Hz C-Bus Source Current - 400mA Design Technology - 16 bit audio path Sampling Rate - 48kHz Source Inputs - 4 Stereo line level analogue 2 Mono all channel inputs 1 Digital audio 1 TOSlink Zone Outputs - 8 digital audio Power Distribution - Centralised power sufficient for 6W per chanel for each of the 8 zones. Wiring Specification - Category 5 UTP cable Distance between Matrix Switcher and Amplifier - 45m (maximum) Analogue Loop Through - Use loop connectors Digital Audio Input - RJ45 and TOSlink Analogue Input Impedance - 47k¥Ø Digital Input Impedance - 110k¥Ø IR Outputs - 2 x C-Bus IR and 1 x reticulated IR ports Dimensions - 242mm(W) x 267mm(D) x 66mm(H) Warm Up Time - 5 seconds Operating Temperature Range - 0¢ªC to 40¢ªC Operating Humidity Range - 10 - 95% RH |
|||||||||||
Please click here for a larger image |
||||||||||||
 |
||||||||||||
| NEW! Black and White Touch Screen |
||||||||||||
 |
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
||||||||||
 |
 |
|||||||||
| The C-Bus Multi-Room Audio System is an audio distribution system that utilizes category 5 data cable for control and audio signal distribution throughout the building. The system has been designed utilising new digital audio distribution technology (developed by Clipsal), in conjunction with Clipsal C-Bus core technology for system communication and integration. Clipsal’s digital audio distribution technology allows for noise and interference free audio reproduction,whilst the C-Bus technology allows the audio products to be seamlessly integrated and used with all existing C-Bus products. A core component of the audio distribution system is the Audio Matrix Switcher, which is used to switch up to four stereo audio inputs to any of the eight available digital audio outputs. Switching of the audio sources is via any C-Bus input units such as a key input, dynamic label switch or touch screen or via the control panel on the front of the matrix switcher. Using the C-Bus network, it is possible to select the audio source, volume up / down and mute sound. Housed in a neat and attractive mechanical enclosure, the audio matrix switcher is designed to be located along side the audio equipment it controls. Powered from a plug pack supply, the unit incorporates a C-Bus power supply capable of sourcing 400mA to the wired network. |
||||||||||
 |
 |
|||||||||
 |
||||||||||
 |
||||||||||
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
KEY INPUT UNITS | INPUT UNITS | SYSTEM UNITS | OUTPUT UNITS | WIRELESS | AUDIO | SOFTWARE | DESIGN GUIDEhome | about us | online shop | contact us |
||||
©2008 C-Bus Direct, a division of LDSCo. Reg 5514263Unit 8, Vision House, Kingfisher Business Park Blashford Ringwood Hants BH24 3NX01425 478395designed by eberlin |
||||
|
|
|
|
|
